TG Pro Alternatives

iStat Menus is a tool used to monitor the performance of the system’s internal component right from the menubar. The best about it is that it provides its monitoring and controlling services for Mac’s entire components. It is about controlling and monitoring the fan speed, disk usage, CPU performance, RAM situation, network situation, component temperatures, Bluetooth functionality. This tool is multipurpose and multifunctional to perform all kinds of activities.

iStat Menus can be considered a Mac performance monitoring application rather than the fan speed controlling application. Its function is not limited to controlling and adjusting the Mac fan’s speed only. In addition to performing simple and easy tasks, it provides comprehensive reports on the system components’ internal situation. It makes it easy for the users to know what is going on in the internal structure. It is highly compatible with all Mac OS X models from old to the latest one, so there is no compatibility issue.

smcFanControl is specially designed for Mac Books for controlling the speed and temperature of Mac’s fan for keeping it normal. Using this tool, Mac users can get full control over their Mac fan speed and system temperature or stopping it from running in hot conditions. However, there is only one drawback, and that is if you want to set the minimum speed, it is not possible due to Apple’s default standard for its Mac OS X operating systems.

There were few errors in the previous versions, like the wrong temperature display and fan speed change error, which has now been resolved in current versions. The users can now enjoy the maximum benefit of the smcFanControl as it is highly compatible with the fan’s default factory setting.

Macs Fan Control is an iMac, MacBook Pro, MacBook Air, Mac Mini, and Mac Pro fan control that is the solution of two primary issues: noise problems and overheating problems. Something after replacing the HDD, the fan of the Mac starts to create noise. Macs Fan Control is a free solution that will automatically eradicate both of these issues.

Macs Fan Control provides the users with a comprehensive mechanism to control the fan speed by setting any Mac fan’s contrast value. The users can also control the fan speed that has a direct relation with the temperature sensors or third-party HDD. In short, Macs Fan Control can be said as a fan controlling and management application that, in addition to working independently, also integrates itself with the other hardware components of the system as well.

It is important to note here that Macs Fan Control is only for the high and serious Mac users who want to control the fan speed without harming their Macs. The other features that are part of the Macs Fan Control are real-time monitoring & reporting, display of tray icon, running in the background, and compatible with Windows versions as well, available in over thirty international languages, etc.

Open Hardware Monitor is a core temperature and fan speed manager application to check what is going on in your system. It is used for temperature monitoring, fan speed managing, fan voltage checking, etc. It is basically a multipurpose and multi-functional temperature and fan speed control that describes the temperature at the sensors, voltages being used, CPU temperatures, fan speed, load and clock speeds of the system, and many other functions.

The best about this platform is that it is highly compatible with all modern hardware. It utilizes the technologies of S.M.A.R.T to provide in-depth detail to the users about their system hardware performance. After monitoring all hardware values, it will display them on the main window with a detailed report about the fans, upper front, lower front, upper back, voltages, temperature, and other important data.

xScan is an application for monitoring the behavior of your computer and Mac. It is for checking the PC’s health, performance of the processor, memory, network, and other system hardware, including fan and battery. It keeps an eye on the component of the system to ensure that everything is working well.

It will provide you an in-depth detail of all of the hardware components, including fan speed. There are many advantages and disadvantages of using this tool. The main benefits that are the part of this application are the pack of one dozen different widget that is about the different components of the system and regarding their controls. Then there is the recording alert system in all these. The users can arrange the widget according to their own requirements. However, if we discuss the alarm system in an emergency, then this is an important feature that lacks it.

Lubbo’s MacBook Pro Fan Control is a tool for monitoring Mac hardware, especially its fan. By using this tool, users can set the minimum and the maximum speed of Mac’s fan. It can control two fans at a time. This tool makes it easy and simple for Mac OS X users to adjust the fan speed according to the GPU and CPU temperature of the system, and that’s why it aligns all hardware components of the system. However, it better works with those Mac OS X systems that contain NVIDIA GPU.

It is highly compatible with the MacBook Pro Unibody, MacBook Pro, and MacBook Air. In all these versions, it is doing well by allowing the users to control even two fans at a time. It lets the Mac users adjust the speed of their Mac fan according to the temperature of GPU and CPU. In that way, it actually ensures the same working level among all hardware components. Moreover, it generates reports as well about the performance of the system.

Argus Monitor is a tool for monitoring and analyzing the system’s hardware’s temperature and health status. A program based on the attributes of S.M.A.R.T. makes this the best alternative to Fan Control. The advanced features are not restricted to a few system hardware only. It is an application that is considered as the doctor of the entire operating system.

The main technical features of Argus Monitor are monitoring of hard disk drive temperatures, utilization of S.M.A.R.T technologies to monitor the performance, the warning system in case of emergency, graphical display of reports about system health, control fan speed, show the speed of system fans, compatible with modern ATI-AMD and NVIDIA graphic cards and control their fan speed as well, monitor the hardware components, overall analyzing of the system temperature and voltages and much more. In short, it is a multipurpose and multifunctional system monitoring tool that can be used from controlling speed to monitoring the internal component activities.

iMac HDD Fan Control is a tool for the Mac operating systems by which the users can control the fan’s speed and noise. This tool allows the users to ensure that the fan is not always running at high speed.

It adjusts the speed of the fan according to the internal temperature of the components. This tool does not modify any setting for components; instead, it will sync the fan speed according to them. Besides, this tool also protects the disks and drives from overheating, and the main advantage of using it is that it works with all types of SSDs and HDDs.

If your fan is creating a lot of noise or gets overheated within few minutes, this tool will ensure your whole system’s protection. iMac HDD Fan Control’s intuitive features are to adjust fan speed according to the hard drive temperature, runs at startup, status bar monitor, custom temperature setting, and much more.

Sometimes Mac users have to rely on the external hardware system to control and monitor the fan’s performance. An application named SSD Fan Control provides Mac users with the features of fixing the noise issues. It offers full control & management over the fan’s speed and performance, highly configurable & adjustable with the internal hardware components, supports the SMART temperature information, and best above all that, SSD Fan Control is free.

SSD Fan Control is based on the SMC system that basically collects the data by reading Mac’s internal hardware components and then provides all details to the users regarding temperature and speed. It lets the users automatically and manually configure the fan speed. Moreover, it runs in the background and controls the entire fan management.

According to the new settings, whenever any setting is made in the system, SSD Fan Control automatically adjusts the fan settings. The users can also automatically find the noisy fan and control the fan in the SMART or Manual mode. So, install the SSD Fan Control and enjoy the silence in your device.

TPFanControl is a reasonably good solution that allows you to eliminate disturbing cooling fan noises on multiple Thinkpad devices found in the T4x notebook series such as T43, T40, T42, and T41. You can easily control the fan speed depending on the temperature of the system. The fans are controlled by the Win XP Visual C++ project through the port IO to the embedded controller. The utility boasts a simple and non-complex user interface that can be handled by everyone without requiring advanced technical knowledge.

Thinkfan is a decent fan control program for Linux enriched with the capabilities to read temperatures, match them against set limits and switch to the right fan level. You can get it working in an instant through it requires hwmon drivers like thinkpad_acpi that allows reading temperature and fan control from userspace. The features include being capable of eliminating your hardware, regardless of whether the dangerous mode is turned on or off, and a few sanity checks. Other than this, it comes with a Dangerous mode which you can use to destroy the hardware without hassle.

Mac/SMC Fan Control for Windows gives you the tools to control fans in Apple Computers in Windows as well as monitor the temperatures. It supports all Intel Macs and closes and relaunches conflicting programs. The features include full compatibility win 32-bit and 64 bit systems, no requirement for BootCamp drivers, decent tutorial provided in the Release Notes to help newbies get started with the software, has the ability to control fans and checks temperature sensors Apple computers with Intel Architecture, and Tested on Vista x32 MBP to ensure flawlessness.

WinAudit is an inventory utility tool that allows the users to view useful information about their computer system, especially when they want to upgrade it. The platform does not require any installation, and users can smoothly run in from an external device. It has a better and attractive user interface and is simple to navigate through.

As soon as the software is run, it provides complete information on the software and hardware of the computer system. Moreover, users can also view security data such as Windows Firewall status, Internet Software, etc. and other error logs, scheduled tasks, and Windows network.

WinAudit displays data about communication ports, startup programs, running programs, drives, system management processes, and other such functions of the system. Moreover, users can easily save all this information in various formats such as PDF or TXT, or they can also email it.

FanControl by Rem0o is open-source, advanced software with extensive customization options and compatible with Microsoft Windows. The features include the ability to move graph points horizontally, Plugin system, reduction in CPU usage by 50%, custom fan curves, save, edit and load multiple profiles, mix different sensors and curves together, manual control, and beautiful UI. It allows you to monitor and control fans of various hardware components like GPU and CPU. The installation process is pretty easy, requiring you to download the archive, extract the contents to the desired folder, and run the application.

NoteBook FanControl is a useful fan control service for notebooks compatible with Linux and Microsoft Windows Operating Systems. It has an advanced configuration system that enables you to adjust it to different modes as per your requirements. The fans can be powered up or down in no time at all. The project is open-source and can be downloaded from GitHub. Besides downloading from GitHub, you also have the option to install the package via chocolatey. Developers who would like to contribute towards its development can easily do so through GitHub.

CoreCtrl enables you to manage your computer hardware via application profiles. It is an Open-Source GNU Linux application that comes with an eye-catching UI for task execution. The aim is to be convenient, flexible, and accessible for the average user. As compared to other GNU/Linux applications, you will find CoreCtrl easy to use and up to the task. This is because several competing applications don’t place much emphasis on regular users and concentrate on specific hardware or features, meaning you end up having multiple control programs with their own unique configuration.

This process is time-consuming and eats up a lot of energy and concentration too. CoreCtrl has a single goal in mind, and that is to revolutionize how things are done in this particular field. The major benefit is that it can be sued to automatically configure the system when an app is launched. The program can be a compiler, 3D modeling application, and a video editor too.

FanCtrl lets you automatically control the fan speed of your Laptop and desktop. It is open-source software that requires Visual redistributable 2019, OSD feature with Rivatuner Statistics Server, and .NET framework 4.6 or above for installation. It supports multiple hardware components such as DIMM thermal sensor, Motherboard, NZXT RGB and Fan Controller, NZXT Kraken x2 and x3, and EVGA CLC.

The UI is simple and is divided into various sections, namely Main, Option, Auto Fan Control, and On-Screen Display. The features include the ability to rename each item, showing fan control, temperature, fan speed, and functionality for changing the percentage of fan control to control the pwm. Other characteristics include modifying the temperature to Fahrenheit, the option to use the library or not, initializing all libraries and settings, support for the DIMM temperature sensor, and EVGA CLC support.

Fan Control is a fan speed manager for Mac Books for monitoring the performance of Mac OS X. Fan Control is a free and hassle-free fan speed manager for Mac. By using Fan Control, the users of Mac OS X operating systems can get and instant access to the voltage being applied by Mac’s Fan, their temperature, hardware position, and many other ancillary services for free.

It is a way of getting full control over the Fan by monitoring its areas and temperatures. If you examine that your Mac Fan is running at very high speed or it is running hot, then give the Fan Control a chance, and then it will make you able to control the voltages, temperature, and speed of your Mac Fan.

It is an application that automatically adjusts the hardware settings of the Mac Fan and then lets the users change the Fan speed according to the CPU temperature. Automatic and manual speed, both are the part of the setting of the Fan Control. Base speed, lower threshold, and upper threshold are all possible in the Fan Control.

SpeedFan is a system monitor program for MS Windows used for reading temperatures, voltages, and fan speeds of computer components. The advantage of using SpeedFan is that it can change fan speeds, depending on the temperature of different parts.

If you think that your system fan is making too much noise, then here is the solution for that in the shape of SpeedFan. SpeedFan works as software to monitor and analyze the voltages being used by the system components, proper temperatures of all system hardware parts, fan speed, and many other vital issues that are otherwise often overlooked by the users.

The best about SpeedFan is that it also operates to check the hard disk temperatures and maintain the excellent health of the hard disk. SpeedFan provides digital access to the users overall their hardware components; they can change fan speed according to the system’s temperature and thus minimize the noise.

When you install this application for the first time, it will automatically collaborate with the system’s digital sensors, by which it will monitor the activities of all components. The users can then set the parameter for low and high fan speed depending upon the situation.

Temperature Gauge is a tool to control speed and temperature for Mac OS X. If you are looking for a highly customized fan control application, then here is the one that gives your full command and control over your system. It is a fan and temperature controlling application that monitors and generates reports over Mac’s internal hardware temperature and fan speeds. The best about this tool is that it never slows down the system’s performance even though it runs in the background.

All information will be displayed in the menu bar. Moreover, the users will be provided with two options of viewing the temperature either in Fahrenheit or Celsius. Users can also monitor the fan’s current, minimum, and maximum speed and manually set the values. In case of a hot or potentially scorching temperature, it displays the notification on the screen.